Metal building facade restoration cleaning.
Metal building environmentally friendly cleaning chemicals.
Metal building cleaning contractor.
Cleaning dirty metal buildings.
Washing old metal buildings.
Cleaning dirty metal panels, old metal building cleaning.
Cleaning dirty metal panels, washing oxidized metal building facade clad Panels, metal panel restoration cleaning.
Oxidized and sun / UV bleached metal building cleaning.
Refurbishing, rejuvenating, repairing and protecting damaged, dirty, faded metal buildings.

Metal panels and metal clad siding are damaged by sun / UV exposure, pollutants and corrosive acid rain. Metal will oxidize when exposed to salt air, dirt and increasing amounts of waterborne and airborne contaminants.Metal deterioration, fading, bleaching, staining, acid etching, oxidation, pitting, degradation and corrosion is evidenced by metal gloss, sheen, color and finish failure on the surface of the metal.
  610.442.2131
We have metal refinishing programs and metal clear protective coatings that clean, refinish, repair scratches, restore, protect and preserve exterior metal colored finishes.


Our Expertise  I  Anodized Aluminum  I  Painted Aluminum  I  Stainless Steel  I  Proven Solutions

Client Case Studies: 1-100  I  Before & After Photo Gallery  I  Client Testimonials  I  Contact York Property Co.



Case Study 52 - UV Weathered, Aged and Dull Metal Building Facade Restoration Cleaning

Condition:  The exterior metal spandrel panels on this owner occupied commercial / industrial building in Houston, Texas were severely bleached, sun faded and oxidized from exposure to diesel exhaust, industrial pollution, corrosive acid rain, ultraviolet exposure and a lack of metal panel remedial maintenance washing. Until management worked with us, they could not find anyone to clean, refinish or restore the damaged, stained and weathered building facade metal panels. The metal clad building was for sale and the metal siding panels needed to be refurbished. The anodized color was bleached and the anodized metal sheen was dull. Building management refused to paint the building and were set on restoring the original finish of the metal siding panels.

York Property Company Solution:  A York Property Company Technical Advisor assisted management with the metal surface damage analysis and the correct oxidized metal cleaning and sun faded metal refinishing specification for the cleaning, repair, renovation and restoration of the metal building facade panels. We refurbished, reconditioned and restored the metal cladding as if it had not been stained, blemished or damaged. The metal surface corrosion, oxidation and airborne particulate is gone and the gray silver colored metal finish is renewed and clean. The metal is now protected from automobile exhaust, weathering, sun and UV exposure, acid rain and pollution.


Contact us today at 610.442.2131 for nationwide service in the United States and Canada.


>> More Anodized Aluminum Cleaning, Refinishing and Restoration Case Studies here. <<




"Thank you for the magic you did on the hopeless condition of the clear metal facade on our two buildings here in Houston, Texas. Not only are we pleased with the results of the cleaning and finishing of the facade but we want to extend our appreciation and thanks to you and your crew that did an impossible job working around the trucks, ramps, dumpsters and the outside concrete repair contractor. It was a pleasure to see the effort and co-ordination that you put forth to keep our tenants and the other contractor on the job working together and happy to do whatever it took to do a professional job."

"We could not find anyone that could
restore our metal facade. The only recommendation that we had was to paint the metal facade. The president of our company refused to have the metal buildings painted because of continuous maintenance - in fact we were going to replace the entire metal facade unless we could find someone to do the proper job of metal restoration. We cannot thank you enough not only for your performance but also your ability to return our anodized aluminum to its original beauty and luster."

Vice President, Amega Corporation


>> More York Property Company Client Testimonials here. <<


Metal that is pitted, scratched, oxidized, corroded, weathered, bleached, acid etched, chemically stained and damaged requires metal cleaning and metal refinishing to protect the anodized finish.


We get caustic calcium spots and acidic mineral deposit stains and residue off of metal. When pollutants, acid rain residue and contaminants sit on the surface of metal the metal finish etch, bleach, oxidized, fade, deteriorate and fail over time.


We remove the metal surface contaminants that eat away at the metal anodic finish. When the acidic contaminants and stains are removed from the anodized finish the metal is then protected with our metal clear protective coating returning the natural color, sheen and luster.


>> View the York Property Company Before & After Photo Gallery here. <<


York Property Company provides professional weathered metal cleaning, oxidized metal refinishing, corrosive acid etched metal restoration and sun faded metal maintenance washing solutions that restore the color, gloss, luster, sheen and visual appearance. Our highly trained company technicians clean, repair, refinish and restore architectural metal surface finishes on-site.

With every metal restoration project we analyze the needs of our customers and develop a comprehensive metal maintenance program. This custom metal maintenance program ensures our clients architectural metal finishes remain looking their best for years to come.




Contact the architectural metal refinishing experts today at 610.442.2131 and request a comprehensive analysis of your building's bleached, marred, old, dirty and faded metal clad paneling.  Our industry-leading, skilled, experienced and knowledgeable technical consultants will specify a customized long-lasting and cost-effective oxidized metal cleaning, weathered metal refinishing and oxidized metal panel restoration specification that will beautify, improve, maintain, restore and protect all your architectural metal finishes.


With the metal surfaces now clean, the clear metal protective coating will preserve and protect the anodic layer from airborne and waterborne contaminants, sun and UV exposure and all around general corrosive weathering.


United States: Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and Wyoming.

Canada: Alberta, British Columbia, Manitoba, Ontario, Quebec and Saskatchewan.



Home Page  I  Our Expertise  I  Anodized Aluminum  I  Painted Aluminum  I  Stainless Steel
Proven Solutions  I  Client Case Studies  I  Client Testimonials  I  Contact York Property Co.



York Property Company Inc. ©  2022   I   Precision Metal Restoration at the Right Price.